Model: Inconel 625
Brand: Ronsco
Code: Alloy1996MR405
Ronsco Alloy 625 Parameter Table |
|
Inconel® Alloy 625/UNS N06625/W.Nr.2.4856/NAS625/0Cr20Ni65Mo10Nb4 |
Material Introduction |
Inconel® Alloy 625 is a Ni-based super alloy that possesses high strength properties and resistance to elevated temperatures. It also demonstrates remarkable protection against corrosion and oxidation. Its ability to withstand high stress and a wide range of temperatures, both in and out of water, as well as being able to resist corrosion while being exposed to highly acidic environments makes it a fitting choice for nuclear and marine applications.
It has excellent mechanical properties at both extremely low and extremely high temperatures, outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion.Alloy 625 is almost complete freedom from chloride induced stress corrosion cracking. Alloy 625 has high resistance to oxidation at elevated temperatures up to 1050C, good resistance to acids, such as nitric, phosphoric, sulfuric and hydrochloric, as well as to alkalis makes possible the construction of thin structural parts of high heat transfer. |
|
|
|
|
|
|
|
Chemical Composition: |
Content | Ni | Cr | C | Mn | Si | Co | AI | Ti | P | Mo | S | Fe |
Min | 58 | 20 |
|
|
|
|
|
|
| 8.00 |
|
|
Max |
| 23 | 0.10 | 0.50 | 0.50 | 1.00 | 0.40 | 0.40 | 0.015 | 10.00 | 0.015 | 5.00 |
Forms & Specifications: |
Seamless pipe/tube: ASTM B444/ASME SB444 AMS 5581 BS 3074 NA21 ISO 6207 DIN 17751 GE B50TF133
Welded Pipe/Tube: ASTM B704/ASME SB704 ASTM B705/ASME SB705 AMS 5581 GE B50TF133 | Sheet/Plate/Strip: ASTM B443/ASME SB443 AMS5599,AMS5869 MAM 5599 ISO 6208 VdTÜV 499 BS 3072 NA21 EN 10095 DIN 17750, ASME Code Case 1935
| Rod & Bar: ASTM B446/ASME SB446 AMS 5666 VdTÜV 499 BS 3076 NA21 DIN 17752 EN 10095 ASME Code Case 1935 ISO 9723
Wire: AMS 5837, ISO 9724, DIN 17753 | Forging: ASTM B564/ASME SB564 AMS 5666 ISO 9725 ASME Code Case 1935 DIN 17754
Fitting: ASTM B366/ASME SB366
Other: ISO 4955A DIN 17744. |
|
|
|
|
|
|
|
|
|
Physical Properties: |
Density: 8.44g/cm³(0.305 lb/cu in) Melting Range:1290℃-1350℃(2350-2460°F) Specific Heat: 0.098 Btu/lb x °F (410 Joules/kg x °K) Magnetic Permeability (75°F, 200 oersted): 1.0006
Excellent resistance to pitting, crevice and corrosion cracking. Highly resistant in a wide range of organic and mineral acids. Good high temperature strength.
| Application: Ocean: marine structures in the sea environment, seawater desalination, marine aquaculture, seawater heat exchange, etc. Environmental protection field: flue gas desulfurization device for thermal power generation, wastewater treatment, etc. Energy sector: atomic power generation, comprehensive utilization of coal, and ocean wave power generation. Petrochemical industry: refining, chemical and chemical equipment. Food field: salt making, soy sauce brewing, etc. High concentration chloride ion environment: paper industry, various bleaching devices. |
|
|
|
|
|
|
Typical Mechanical Property Requirements |
Temperature | Ultimate Tensile strength Rm N/mm2 | Yield strength RP0.2 N/mm2 | Elongation |
°F | °C | psi | mpa | psi | mpa |
|
1920 | 1065 | 63000 | 430 | 136000 | 940 | 51.5 |
For more information about Inconel 625 (UNS N06625, W.Nr.2.4856) Pipes & Tubes, Sheet & Plates, Round Bars & Rods, Wire, Forgings Etc, please call +86 17708476248 or send an Email to [[email protected]]