Model: Incoloy A-286
Brand: Ronsco
Code: Alloy1996MR411
Ronsco Incoloy®A286 Parameter Table |
|
Incoloy®A286 / UNS S66286 / SUH660 / W Nr.1.4980 / x5nicrti26-15 |
Genenal Introduction |
Incoloy®A286 us a Fe-25Ni-15Cr superalloy, which is comprehensively strengthened with molybdenum, titanium, aluminum, vanadium and trace boron. It has high mechanical property of aging hardening. The alloy maintains good strength and oxidation resistance at temperatures up to approximately 1300°F (700 ° C). The high temperature strength is superior to that of austenitic stainless steel below 700℃. Compared with SUS304, Ni content is higher, and hardening elements such as Ti and Al are added. Therefore, through the aging hardening treatment, fcc_Ni3(Al,Ti) phase (fcc_Ni3(Al,Ti)) will precipitate out, and the high temperature strength will be significantly improved. Under 650℃, it has high yield strength, durability, creep strength, good plasticity and satisfactory welding performance. |
|
|
|
Chemical Composition: |
Content | C | Si | Mn | S | Ni | Cr | P | Mo | V | Al | Ti | B | Fe |
Min |
|
|
|
| 24.0 | 13.5 |
| 1.0 | 0.10 |
| 1.90 | 0.001 | BAL. |
Max | 0.08 | 1.00 | 2.00 | 0.03 | 27.0 | 16.0 | 0.040 | 1.5 | 0.50 | 0.35 | 2.35 | 0.01 | BAL. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Physical Properties: | Application: |
Density: 7.94g/cm³ Melting Point: 1370℃-1430℃ Specific Heat: 419 J/kg・K Electrical Resistivity: 91 J/kg・K
• Can be produced by AOD refining or vacuum induction melting • Iron-base superalloy • High strength and corrosion resistance up to 1300°F (704°C) | • Aircraft and industrial gas turbine components • Fasteners • Springs • After Burner Parts • Industrial Gas Turbines • Moderate Corrosion Applications in Aqueous Solutions • Non-Magnetic Cryogenic Equipment |
|
Typical Mechanical Properties: |
Material | Temp℃ | Yield Strength 0.2% min. (mpa) | Tensile Strength min. (mpa) | Elongation % min. |
Forging Bar | RT | 680 | 950 | 28 |
The advantage of Ronsco |
1, | Price lower than Europe, USA 20~30%. |
2, | 100% quality guaranty because we remelt by VIM+ESR. |
3, | Best Service: 0 payment if you test not ok. |
4, | 0 fee for UT, PT. |
5, | Low MOQ for new materials: 200kg. |
6, | Fast 20~30 days of lead time for new materials. |
For more information about Incoloy A-286 (UNS S66286 / W Nr.1.4980) Pipes & Tubes, Sheet & Plates, Round Bars & Rods, Wire, Forgings Etc, please call +86 17708476248 or send an Email to [[email protected]]