Our Factory

All Categories

High Temperature Alloys

You are here : Home>Product>Material>High Temperature Alloys

  • https://www.alloy-ronsco.com/upload/product/1634528348542480.jpg
  • https://www.alloy-ronsco.com/upload/product/1634528348365423.jpg
  • https://www.alloy-ronsco.com/upload/product/1651050659158270.jpg
  • 2
  • 3
  • 14

China Manufacturer Special Steel High Quality 253MA (UNS S30815) F45 heat-resistant austenitic stainless steel plate

253MA is a heat-resistant austenitic stainless steel designed for applications requiring high creep strength and excellent corrosion resistance. Its use temperature scale is 850~1100 ℃.

  • Product Description
  • Inquiry

Model: 253MA (UNS S30815) F45/W.Nr.1.4835/1.4893

253MA is a heat-resistant austenitic stainless steel designed for applications requiring high creep strength and excellent corrosion resistance. Its use temperature scale is 850~1100 ℃.

The chemical composition of 253MA is balanced, which makes the steel have the most suitable induction function in the temperature range of 850℃-1100℃, extremely high oxidation resistance, and the temperature of oxide scale is as high as 1150℃; extremely high resistance to creep deformation Capability and creep rupture strength; in most gaseous media, it has excellent resistance to high temperature corrosion and balance brush corrosion; high yield strength and tensile strength at high temperatures; outstanding formability and weldability , And meet the machinability.

In addition to the alloying elements chromium and nickel, 253MA stainless steel is also rich in a few rare earth metals, and then its oxidation resistance is significantly improved. Nitrogen is added to improve the creep function and make this steel completely austenite. Although the content of chromium and nickel is relatively low, this stainless steel has the same high temperature characteristics as highly alloyed alloy steels and nickel-based alloys in many cases.

Use scale:

253MA is widely used in sintering equipment, blast furnace equipment, steel melting, melting furnace and continuous casting equipment, rolling mill (heating furnace), heat treatment furnace and accessories, mineral deposit equipment and cement production equipment, etc. 253MA steel can be used in pressure-bearing occasions up to 900 ℃ and non-pressure-bearing high-temperature parts with working temperature up to 1150 ℃.

Ronsco 253MA Parameter Table

253MA, UNS S30815, WNR 1.4835

Genenal Introduction

253 MA is a stainless steel with excellent oxidation and creep resistance in cyclic conditions that is best employed in temperatures up to 1150 °C/2100 °F. There is a slight susceptibility to embrittlement during continuous operation at 600–850 °C/1110–1560 °F.
Chemical Composition:

ContentCSi MnSNiCrPMoCuFeCe


10.00 20.00 


Max0.10 2.00 0.80 0.0312.00 22.00 0.040 


Forms & Specifications

Bar & Profile: ASTM A276/ASME SA276
Thick Plate, Sheet & Strip: ASTM A240/A480/A167/ASME SA240,
Seamless pipe/tube: ASTM A312/A213/ASME A312, ASTM A213/ASME SA213, ASTM A269/ASME SA269,
Welded nominal pipe: ASTM A312/ASME A312,  , ASTM A269/ASME SA269, ASTM A249/ASME SA249, ASTM A409/ASME SA409
Pipe fittings: ASTM A403
Forgings: ASTM A182
Physical Properties


Density:8 g/cm³
Melting Range:1371-1432 ⁰C
Poisson's Ratio:0.31
High creep strength.
Very good resistance to isothermal and, particularly, cyclic oxidation.
Good structural stability at high temperatures.
Good weldability.
Maximum operating temperature is approx. 1150°C (2100°F)
Oil industry equipment
Conveyor belts
Refractory anchors
Expansion bellows
Radiant tubes, tube shields, and valves and flanges
Rotary kilns
Exhaust manifolds
Power generation applications
Cyclone dip tubes
Impact separators
Bell furnaces and muffle furnaces
Automotive components
Heat treatment trays
Recuperator tubes for the steel industry
Large-scale bakery ovens
Typical Mechanical Properties:

Yield Strength 0.2%
min. (ksi)
Tensile Strength
min.  (ksi)
Elongation %
Hardness HB
Sheet & PlateASTM A24045.00 87.00 40 217
Seamless Tube & PipeASTM A21345.00 87.00 40217.00 
Seamless/Wedled Tube & PipeASTM A31245.00 87.00 40 217
Wedled TubeASTM A24945.00 87.00 35 B95

Product Name253MA (UNS S30815) F45/W.Nr.1.4835/1.4893 heat-resistant austenitic stainless steel plate
Type Cold rolled/hot rolled
Grade Stainless steel 304 / 304L / 310S / 316L / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254Mo / S31803 / S32750 / S32205 etc
Monel 400 / Monel K-500 
Inconel 600 / Inconel 601 / Inconel 625 / Inconel 617 / Inconel 690 / Inconel 718 / Inconel X-750
Incoloy A-286 / Incoloy 800 / Incoloy 800H / Incoloy 800HT
Incoloy 825 / Incoloy 901 / Incoloy 925 / Incoloy 926
Nimonic 75 / Nimonic 80A / Nimonic 90 / Nimonic 105 / Nimonic 263 / Nimonic L-605
Hastelloy B / Hastelloy B-2 / Hastelloy B-3 / Hastelloy C / Hastelloy C-276 / Hastelloy C-22
Hastelloy C-4 / Hastelloy C-200 / Hastelloy G-35 / Hastelloy X / Hastelloy N
Austenitic stainless steel 904L / XM-19 / 316Ti / 316LN / 371L / 310S / 253MA
DP steel 254SMo / F50 / 2205 / 2507 / F55 / F60 / F61 / F65 
PH stainless steel 15-5PH / 17-4PH / 17-7PH 
Thickness hot rolled  2.5mm-200mm
cold rolled 0.3mm - 6mm
widthhot rolled  1000mm-3500mm
cold rolled 10mm - 2000mm
Finish 2B, NO.1, HL, NO.4, 4K, 8K, sandblast, BA
Packingwooden box,  wooden crame/pallet, iron frame
Inspection TUV,SGS,BV,ABS,LR and so on
Application Construction, Chemical, Pharmaceutical & Bio-Medical, Petrochemical & Refinery, Environmental, Food Processing, Aviation, Chemical Fertilizer, Sewage Disposal, Desalination, Waste Incineration etc. 
Processing Service Machining : Turning / Milling / Planing / Drilling / Boring / Grinding / Gear Cutting / CNC Machining  
Deformation processing :  Bending / Cutting / Rolling / Stamping 
Delivery Time7-40 days
Payment T/T, L/C,D/A,D/P, Western Union,MoneyGram,According to customer requirements payments for offline orders.
TransportationBy air, by sea, by train, by truck
WarrantyTrade assurance after sales service

Contact Us