Inconel 601 alloy is a nickel-chromium-iron-based solid solution strengthened alloy. It has good high temperature corrosion and oxidation resistance, excellent cold and hot processing and welding properties, and has satisfactory thermal strength and high plasticity below 700°C. The alloy can be strengthened by cold working, and it can also be connected by resistance welding, melt welding or brazing. It is suitable for making anti-oxidation parts that can withstand low loads below 1100°C.
The performance characteristics of Inconel 601 are better than 600. It is an alloy with high chromium content. It has excellent oxidation and corrosion resistance. Because the composition also contains aluminum, it has good oxidation resistance and curing performance. The characteristics of this alloy are Excellent oxidation resistance and carbonization resistance at high temperature, good mechanical properties at room temperature and high temperature, good stress corrosion cracking resistance, high creep due to controlled carbon content and grain size Breaking strength.
Inconel 601 has different brand names in different countries, national standard brand numbers: NS3103, NS313, 0Cr23Ni63fe14al, American standard brand numbers: inconel601, No6601, German brand number: 2.4851, NICR23FE.
Inconel 601 chemical composition: carbon C: ≤0.10, chromium Cr: 21~25, nickel Ni: 58~63, aluminum AL: 1.0~1.7, iron Fe: residual, manganese Mn: ≤1.00, silicon Si: ≤0.50, phosphorus P : ≤0.030, sulfur S: ≤0.015.
Inconel 601 physical properties: density 8.11g/cm3, melting point 1308-1368°C, mechanical properties: alloy Inconel 600, tensile strength (MPA): RmN/mm2; annealing treatment at 650°C, solution treatment at 600°C, yield strength (MPA): RP0 .2N/mm2; annealing treatment 300-solution treatment 240, elongation: A5%, 30-30, Brinell hardness HB: annealing treatment.-solution treatment ≤220.
Inconel 601 processing and welding performance: It has good thermal processing performance, the deformation temperature is 870~1230 degrees, the large deformation is 1040~1230, and the low plastic temperature is 650~871 degrees. Cold working in solid solution is a good effect. The strengthening effect is not as good as 18CR18NI. The heat treatment is between 1100 and 1150 degrees, which is easy to weld, but different parts use different processes and materials.
Inconel 601 corrosion resistance: An important property of the alloy is its oxidation resistance at temperatures up to 1180°C. Even under severe conditions, such as heating and cooling cycles, a dense oxide film can be formed to obtain high resistance to peeling. Has good carbonization resistance. Due to the high content of chromium and aluminum, it has good oxidation resistance in high-temperature sulfur-containing atmospheres.
Inconel 601 application fields: mainly used in heating equipment, chemical industry, environmental pollution control, and power industry. Such as heat treatment equipment and parts, various industrial furnace tubes, sleeves, flame nozzles, electric heating elements, resistance wire sleeves, condenser tubes for the chemical industry, equipment parts in HNO3 production, and heat-resistant and corrosion-resistant parts for the glass industry.
The minimum mechanical properties of Inconel 601 alloy at room temperature:
Alloy and state
An important property of 601 alloy is its oxidation resistance at temperatures as high as 1180°C. Even under severe conditions, such as heating and cooling cycles, 601 can generate a dense oxide film to obtain high peel resistance. 601 has good resistance to carbonization. Due to the high content of chromium and aluminum, 601 has good oxidation resistance in high-temperature sulfur-containing atmospheres.
Pipe support and soot handling department.
|Product Name||Inconel 601（UNS N06601）Pipes , Plates, Tubes, Sheets|
|Type||Seamless / Welded|
|Shape||Square / Rectangular / Round|
|Grade||Stainless steel 304 / 304L / 310S / 316L / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254Mo / S31803 / S32750 / S32205 etc|
|Monel 400 / Monel K-500|
|Inconel 600 / Inconel 601 / Inconel 625 / Inconel 617 / Inconel 690 / Inconel 718 / Inconel X-750|
|Incoloy A-286 / Incoloy 800 / Incoloy 800H / Incoloy 800HT|
|Incoloy 825 / Incoloy 901 / Incoloy 925 / Incoloy 926|
|Nimonic 75 / Nimonic 80A / Nimonic 90 / Nimonic 105 / Nimonic 263 / Nimonic L-605|
|Hastelloy B / Hastelloy B-2 / Hastelloy B-3 / Hastelloy C / Hastelloy C-276 / Hastelloy C-22|
|Hastelloy C-4 / Hastelloy C-200 / Hastelloy G-35 / Hastelloy X / Hastelloy N|
|Austenitic stainless steel 904L / XM-19 / 316Ti / 316LN / 371L / 310S / 253MA|
|DP steel 254SMo / F50 / 2205 / 2507 / F55 / F60 / F61 / F65|
|PH stainless steel 15-5PH / 17-4PH / 17-7PH|
|Out diameter||Seamless Pipe 6MM - 1174MM or customized|
|Welded Pipe 1.9mm - 5000mm or customized|
|Thickness||Seamless Pipe 1mm - 80mm or customized|
|Welded Pipe 0.5mm - 80mm or customized|
|Max Length||Seamless Pipe 12000mm or customized|
|Welded Pipe 50000mm or customized|
|Finish||2B, Pickling, polished, brushed, sandblast, BA, EP,|
|Packing||waterproof polybag, wooden box, end cap, wooden crame/pallet|
|Inspection||TUV,SGS,BV,ABS,LR and so on|
|Application||Chemical, Pharmaceutical & Bio-Medical, Petrochemical & Refinery, Environmental, Food Processing, Aviation, Chemical Fertilizer, Sewage Disposal, Desalination, Waste Incineration etc.|
|Processing Service||Machining : Turning / Milling / Planing / Drilling / Boring / Grinding / Gear Cutting / CNC Machining|
|Deformation processing : Bending / Cutting / Rolling / Stamping|
|Delivery Time||7-40 days|
|Trade Term||FOB CIF CFR CIP DAP DDP EXW|
|Payment||T/T, L/C,D/A,D/P, Western Union,MoneyGram,According to customer requirements payments for offline orders.|
|Transportation||By air, by sea, by train, by truck|
|Warranty||Trade assurance after sales service|