QUALITY IS THE LIFE OF OUR FACTORY
You are here: Home » News » Nickel Alloy Products Knowledge

Nickel Alloy Products Knowledge

  • 2021-06-10

    Introduction to the welding process of Inconel 625 alloy

    Introduction to the welding process of Inconel 625 alloyThe weldability of nickel-based alloy steel is not good, so reasonable welding process and corresponding measures should be selected to avoid defects such as hot cracks and pores during welding. The difficulty of the welding of bimetal composit

  • 2021-06-10

    7 Steps of Inconel 718 Processing and Heat Treatment

    Inconel 718 alloy is a precipitation hardening nickel-chromium-iron alloy containing niobium and molybdenum. It has high strength, good toughness and corrosion resistance in high and low temperature environments below 650°C. The state can be solid solution treatment or precipitation hardening state.

  • 2020-06-09

    Hastelloy Alloy in 2020 Complete Alloy Overview

    Hastelloy is a nickel-based corrosion-resistant alloy, mainly divided into nickel-chromium alloy and nickel-chromium-molybdenum alloy. Hastelloy has good corrosion resistance and thermal stability, and is mostly used in the aviation industry and chemical fields.Hastelloy grades include the followin

  • 2020-06-08

    9 Guidelines for the welded fabrication of nickel alloys Hastelloy C-276

    Hastelloy C-276, UNS N10276, or C276 for short, is the most common nickel-based corrosion-resistant alloy suitable for various chemical industries containing oxidizing and reducing media. The high molybdenum and chromium content makes the alloy resistant to chlorine Ion corrosion, tungsten element

  • 2020-06-05

    5 Characteristics of Duplex 2205 Stainless Steel

    Duplex 2205 is a nitrogen-reinforced duplex stainless steel whose development objective is to solve common corrosion problems encountered with 300 series stainless steel. "Duplex" describes a stainless steel series that is neither completely austenitic like 304 stainless steel nor pure ferrite like

  • 2020-06-05

    What is Monel 400 Alloy (UNS No4400)? Everything You Should Know.

    Alloy 400 is a single-phase solid-solution nickel-copper alloy that has excellent resistance to many corrosive environments in the temperature range from minus to 800°F. This alloy can only be hardened by cold working rather than heat treatment. The Curie temperature of the alloy is within the ambie

  • Total 2 pages  Go to Page
  • Go
PH Stainless Steel
17-4PH
17-7PH
15-5PH
Contacts​
Phones+86-17708476248 / 0731-82250427
Email: info@ronsteel.com
Address: Room 2505-2508, 25th floor, C3 Building, Wanda Plaza, Kaifu District, Changsha, Hunan Province, China

Home

Copyright ©2017 Allianz Metal products CO.,LTD,,All Rights Reserved