You are here: Home » Products » Series » Hastelloy » Hastelloy G-30
Share to:

Hastelloy G-30

HASTELLOY(r) G30(r) alloy is corrosion resistant and has the ability to oxidize acids.

Quantity:

  • Hastelloy G-30 UNS N06030 DIN W. Nr. 2.4603 Alloy 20 N08020 NS143 Carpenter20Cb3 AISI Alloy20Cb-3 ASTM Alloy20Cb-3
  • RONSCO, BAOSTEEL, JISCO, TISCO, etc.
  • Super Alloy-Sheet-14

Super alloys or high performance alloys are used in environments with very high temperature above 540ºC (1000ºF) where deformation resistance and high surface stability are chiefly required. They have good oxidation and creep resistance. Cobalt-base, nickel-base and iron-base alloys are the three major types of super alloys. The iron-base super alloys are generally wrought alloys provided with stainless steel technology. Nickel-base and cobalt-base super alloys may be cast or wrought based on its composition or application. Super alloys can be generally forged, rolled to sheet or produced in different shapes. Highly alloyed compositions are formed as castings. They can be strengthened using hardening techniques like work hardening, solid-solution hardening and precipitation hardening.


The following sections will provide a detailed description of HASTELLOY(r) G30(r) alloy.

Chemical Composition

The following table shows the chemical composition of HASTELLOY(r) G30(r) alloy.

ElementContent (%)
Nickel, Ni43
Chromium, Cr28.0-31.5
Iron, Fe13-17
Cobalt, Co 5
Molybdenum, Mo4-6
Tungsten, W1.50 - 4
Manganese, Mn 1.50
Copper, Cu1 - 2 .40
Silicon, Si0.8
Phosphorous, P 0.040
Carbon, C 0.030
Sulfur, S 0.020

Physical Properties

The physical properties of HASTELLOY(r) G30(r) alloy are given in the following table.

PropertiesMetricImperial
Density8.22 g/cm³0.297 lb/in³
Melting point1371ºC2500ºF

Mechanical Properties

The mechanical properties of HASTELLOY(r) G30(r) alloy are given in the following table.

PropertiesMetricImperial
Tensile strength1096 MPa159000 psi
Yield strength (@0.2%)1000 MPa145000 psi
Modulus of elasticity (plate heat treated to 1177°C, rapid quenched)202 GPa29300 ksi
Elongation at break (in 50.8 mm)12%12%
Reduction of area57%57%
Hardness, Brinell (converted from Rockwell C hardness)304304
Hardness, Knoop (converted from Rockwell C hardness)326326
Hardness, Rockwell C3232
Hardness, Vickers (converted from Rockwell C hardness)316316


PH Stainless Steel
17-4PH
17-7PH
15-5PH
Contacts​
Pones:+86-135-1749-7929
/ 0731-82250427
Email:info@ronsteel.com
Address: 1706, FuLi Building, NO.97, JiuCaiYuan Road, FuRong District, Changsha,Hunan, China

About Us

Copyright ©2017 Allianz Metal products CO.,LTD,,All Rights Reserved