You are here: Home » Products » Material » Super Stainless Steel » 310S Stainless Steel
Share to:

310S Stainless Steel

310S is an austenitic chromium nickel stainless steel with good oxidation resistance and corrosion resistance. Because of the high percentage of chromium and nickel, 310S has much better creep strength, can work continuously at high temperature, and has good high temperature resistance.
Quantity:
  • 310S Stainless Steel
  • Ronsco
310S stainless steel has good high temperature resistance. When the temperature exceeds 800 [1], it begins to soften and the allowable stress begins to decrease continuously. The maximum service temperature is 1200 ℃. Due to the high content of nickel (Ni) and chromium (CR), it has good oxidation resistance, corrosion resistance, acid and alkali resistance and high temperature resistance. High temperature resistant steel pipes are specially used for manufacturing electric furnace tubes. After increasing the carbon content in austenitic stainless steel, the strength is improved due to its solid solution strengthening effect. The chemical composition characteristics of austenitic stainless steel are based on chromium and nickel, adding molybdenum, tungsten, niobium and titanium Because of its face centered cubic structure, it has high strength and creep strength at high temperature.
Genenal Introduction
Stainless steel 310S is an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 2000°F. Its high Cr and Ni contents provide comparable corrosion resistance, superior resistance to oxidation and the retention of a larger fraction of room temperature strength than the common austenitic alloys such as 304. Grade 310S is a low carbon version of grade 310. 310S is less prone to embrittlement and sensitization in service. Now 310S replaces 310. 
Chemical Composition:
Content C Si  Mn S Ni Cr P Mo Cu Fe
Min



19.20  24.00 


BAL
Max 0.08  1.50  2.00  0.03 22.00  26.00  0.045  0.75  0.50  BAL











Forms & Specifications:
Bar & Profile: ASTM A276/ASME SA276
Thick Plate, Sheet & Strip: ASTM A240/ASME SA240,
Seamless pipe/tube: ASTM A312/ASME A312, ASTM A213/ASME SA213, ASTM A269/ASME SA269,
Welded nominal pipe: ASTM A312/ASME A312,  , ASTM A269/ASME SA269, ASTM A249/ASME SA249, ASTM A409/ASME SA409
Pipe fittings: ASTM A403
Forgings: ASTM A473, ASTM A182
Physical Properties Application:
Density: 8.00g/cm³
Oxidation resistance to 2000°F
Moderate strength at high temperature
Resistance to hot corrosion
Strength and toughness at cryogenic temperatures
Kilns
Heat Exchangers
Radiant Tubes
Muffles, retorts, annealing covers
Tube hangers for petroleum refiing adn steam boilers
Coal gasifier internal components
Saggers
Furnace parts, conveyor belts, rollers, oven linings, fans
Food processing equipment
Cryogenic structures
Typical Mechanical Properties:
Temperature, °F Temp℃ Yield Strength 0.2%
min. (ksi)
Tensile Strength
min.  (ksi)
70 20 35.00  80.00 
1000 538 20.80  67.80 
1200 650 20.70  54.10 
1400 760 19.30  35.10 
1600 870 12.20  19.10 


Product Name 310S, UNS S31008, DIN 1.4845
Type  Welded / Seamless
Shape  Square / Rectangular / Round
Standard  GB,AISI,ASTM,DIN,EN,JIS
Grade  Stainless steel 304 / 304L / 310S / 316L / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254Mo / S31803 / S32750 / S32205 etc
Monel 400 / Monel K-500 
Inconel 600 / Inconel 601 / Inconel 625 / Inconel 617 / Inconel 690 / Inconel 718 / Inconel X-750
Incoloy A-286 / Incoloy 800 / Incoloy 800H / Incoloy 800HT
Incoloy 825 / Incoloy 901 / Incoloy 925 / Incoloy 926
Nimonic 75 / Nimonic 80A / Nimonic 90 / Nimonic 105 / Nimonic 263 / Nimonic L-605
Hastelloy B / Hastelloy B-2 / Hastelloy B-3 / Hastelloy C / Hastelloy C-276 / Hastelloy C-22
Hastelloy C-4 / Hastelloy C-200 / Hastelloy G-35 / Hastelloy X / Hastelloy N
Austenitic stainless steel 904L / XM-19 / 316Ti / 316LN / 371L / 310S / 253MA
DP steel 254SMo / F50 / 2205 / 2507 / F55 / F60 / F61 / F65 
PH stainless steel 15-5PH / 17-4PH / 17-7PH 
Out diameter  Welded Pipe 1.9mm - 5000mm or customized
Thickness  Welded Pipe 0.5mm - 80mm or customized
Max Length  Welded Pipe 50000mm or customized
Finish  2B, Pickling, polished, brushed, sandblast, BA, EP,
Packing  waterproof polybag, wooden box, end cap, wooden crame/pallet
Inspection  TUV,SGS,BV,ABS,LR and so on
Application  Chemical, Pharmaceutical & Bio-Medical, Petrochemical & Refinery, Environmental, Food Processing, Aviation, Chemical Fertilizer, Sewage Disposal, Desalination, Waste Incineration etc. 
Processing Service  Machining : Turning / Milling / Planing / Drilling / Boring / Grinding / Gear Cutting / CNC Machining  
Deformation processing :  Bending / Cutting / Rolling / Stamping 
Welded 
Forged 
Delivery Time 7-40 days
Trade Term FOB CIF CFR CIP DAP DDP EXW 
Payment 付款方式 T/T, L/C,D/A,D/P, Western Union,MoneyGram,According to customer requirements payments for offline orders.
Transportation By air, by sea, by train, by truck
Sample Free
Warranty Trade assurance after sales service

Production flow chart of seamless pipe1

about us

certificate

packing


PH Stainless Steel
17-4PH
17-7PH
15-5PH
Contacts​
Phones:+86-135-1749-7929
/ 0731-82250427
Email:info@ronsteel.com
Address: 1706, FuLi Building, NO.97, JiuCaiYuan Road, FuRong District, Changsha,Hunan, China

Home

Copyright ©2017 Allianz Metal products CO.,LTD,,All Rights Reserved